quelques images:
i went to the bodyshop and did a few bits...
seats were all out of line, so examined them to see why?
this was the problem...
so i removed the drivers seat side mounts and used the passenger side mounts as a temporary fix to test make sure nothing else was bent.
check bottom brace, its bent!! too much corner kerb rapage
trial fitted my wing and door
i also,
* re mounted the battery back in the correct postion, as it had jumped out of place!
* removed headlamps so i can get a new passenger side one and make sure the other is sealed 100%
* took wheels off, because i've got him to repaint two of them and paint me two more fresh VTS rims.
* removed exhaust and filter for re sale.
booked more work in, tailgate and rear bumper will be getting blown over with paint, as will the passenger side front wing and door.
and Good luck
